Part
Number CB-HFT1000
Header CB-HFT1000 Military
Spec Cross-linked Polyolefin Heat Shrink Tubing
Description
Thermosleeve/CYG CB-HFT1000 is our premium grade series of
heat shrink tubing and is also an excellent choice for many general and
commercial applications. CB-HFT1000 offers outstanding all round performance,
is very flexible flame retardant tubing made from a special blend of cross-linked polyolefin. CB-HFT1000 has a minimum
shrink temperature rating of 100 degrees C (212 degrees F), offers superior
chemical resistant properties and out performs many general-purpose polyolefin tubing.
Agency
Approval & Compliance
Application CB-HFT1000 heat shrink tubing is widely used to provide insulation and strain
relief cover to both wire terminations and electrical connectors. Other general applications include wire
marking coding and general insulation for light harness assemblies.
Shrink
Ratio and
Operating Temperature CB-HFT1000 is available with either a 2:1 or 3:1 shrink ratio. When fully recovered, the 2:1
material will shrink to one half (50%) of its original supplied diameter and
the 3:1 material will shrink to one third (33%) of its original supplied
diameter. The tubing¹s wall thickness will also change proportionally to the
degree of recovery.
CB-HFT1000
has a continuous operating temperature rating of -55 degrees C (-67 degrees F)
and 135 degrees C (275 degrees F)
Standard Sizes and Dimension
|
Size 2X |
|||||
|
Type |
Size (inch) |
As Supplied (mm) |
After Recovery (mm) |
||
|
Min. Inside Diameter (D) |
Nominal Wall-thickness (T) |
Max. Inside Diameter (d) |
Wall-thickness (t) |
||
|
101 |
3/1/64 |
1.2 |
0.21±0.08 |
0.6 |
0.41±0.08 |
|
102 |
1/16" |
1.6 |
0.21±0.08 |
0.8 |
0.43±0.08 |
|
103 |
3/1/32 |
2.4 |
0.25±0.08 |
1.2 |
0.51±0.08 |
|
104 |
1/8" |
3.2 |
0.25±0.08 |
1.6 |
0.51±0.08 |
|
105 |
3/16" |
4.8 |
0.25±0.08 |
2.4 |
0.51±0.08 |
|
106 |
1/4" |
6.4 |
0.32±0.10 |
3.2 |
0.64±0.08 |
|
107 |
3/8" |
9.5 |
0.35±0.10 |
4.8 |
0.64±0.08 |
|
108 |
1/2" |
12.7 |
0.33±0.10 |
6.4 |
0.64±0.08 |
|
109 |
3/4" |
19.1 |
0.38±0.12 |
9.5 |
0.76±0.12 |
|
110 |
1" |
25.4 |
0.45±0.15 |
12.7 |
0.90±0.15 |
|
111 |
1-1/2" |
38.1 |
0.52±0.20 |
19.1 |
1.02±0.20 |
|
112 |
2" |
50.8 |
0.57±0.20 |
25.4 |
1.14±0.20 |
|
113 |
3" |
76.2 |
0.63±0.20 |
38.1 |
1.27±0.20 |
|
114 |
4" |
101.6 |
0.70±0.20 |
50.8 |
1.4±0.23 |
|
|
|
|
|
|
|
Typical Properties
|
Item |
Specifications |
|
Shrink Temperature (°C) |
100°C - 140°C |
|
Temperature Range (°C) |
125 |
|
Radial Shrinking Ratio (%) |
„50 |
|
Longitudinal Change (%) |
-55 ~ +5 |
|
Tensile Strength (MPa) |
„10.4MPa |
|
Ultimate Elongation (%) |
200 |
|
Aging in Circulating-air Oven |
175±2.0 ºC, 168Hrs |
|
Tensile Strength (MPa) - After
Aging |
6.9MPa |
|
Ultimate Elongation (%) - After
Aging |
|
|
Dielectric Voltage Withstand (V) |
|
|
Volume Resistivity (Ω.cm) |
1012 |
|
Dielectric Voltage (V) AC |
|
|
Dielectric Strength (kV/mm) |
15.8kv/mm |
|
Flammability |
|
|
Concentricity (%) |
„50 |
|
Heat Shock |
No cracks, flowing or dripping |
|
Cold Shock |
|
|
Radial Shrinkage |
|
|
Copper Corrosion |
No corrosion |
Availability
Four-foot lengths, master reels and cut pieces
Important
Notice The information related to Thermosleeve/CYG
products both in printed or electronic format is believed to be reliable but
the accuracy and completeness is not guaranteed. We suggest that before using
this product, you evaluate and determine if it is suitable to your intended
application. Thermosleeve/CYG assumes no risk or liability associated with the
use of this material. Any statements related to this product that are not
contained in the current Thermosleeve/CYG online or printed literature, or any
contrary statements referenced on purchase order, shall have no force or effect
unless expressly agreed to in writing and signed by an office of
Thermosleeve/CYG.
Limited
Warranty/Limited Liability